Quad Seat Cover
Fitting Instructions
Please Avoid Machine Washing
Polaris Ranger 400 Specific Demonstration Videos
Step One
- Clean Seat and repair any damage to vinyl. (Silver 100Mph tape)
Step Two
- Fit the front of the cover. Centre and settle into the correct position.
- Place the seat, front down on a bench with the seat top facing you. Pushing down on the seat, shortening it, roll the rear of the cover over the rear of the seat. Centre and settle into position.
Step Three
- Place the seat on its side and roll the cover over the seat edge. Flip and do the same to the other side.
- Working sideways from the centre, hand-iron the cover towards the edge. This will settle the cover into position.
- If Velcro supplied mark location and staple into place. Do not use staples longer than 4mm.
To remove the seat cover, simply follow the fitting steps in reverse order.
© Copyright 2012
DingoSeatCovers Terms of Use